DECO TECH Silicone Formulations:

 
Dura Pro Silicone Pads

DuraPro™ silicone pads - Premium Quality

In 1997 we developed our premium quality DuraPro™ silicone pad formulation which is made from the highest quality German made silicone rubber material and it produces excellent prints with extreme durability. The secret formula to our DuraPro™ formulation cannot be revealed, but you'll find that they have been optimized for continuous flexing and will provide consistent and repeatable ink lay-down. This is the “industry standard” material that all other pads are measured against. Our DuraPro™ silicone has excellent abrasion resistance, excellent chemical (thinner) resistance (and it doesn’t swell up), and it provides excellent flexibility/ cut resistance. The DuraPro™ silicone provides superior ink release qualities and this silicone formulation works extremely well with two-components inks, single component inks and UV pad printing inks. Our DuraPro™ silicone rubber pads are available in 65 to 20 Shore A (00 scale) hardness's.

Stat-X™ silicone pads - High Quality

Static energy is the #1 enemy in achieving quality printing results in pad printing and standard issue silicone pads can quickly become charged with static energy during production. When a silicone transfer pad is loaded with static, it will easily collect dust particles and debris, which will stop you from achieving sharp prints with clean edge-definition. Static energy causes a phenomenon known as “spider webbing” where you will see little web-like trails of ink being diplaced and printed around the edges of your artwork. A static charged pad can also cause static-discharge while printing on sensitive electronic devices resulting in circuit failure. Our Stat-X™ pad formulation has been developed using conductive silicone polymers and fillers that cannot be static-charged. Due to these anti-static properties, no dust particles or debris will be collected on the pad surface, and the possibility of static-discharge is eliminated. End-result is that, Stat-X™ pads eliminate static energy and the Stat-X™ pads deliver sharp, fine-line detailed prints. Our Stat-X™ silicone rubber formulation is available in 65 to 40 Shore A (00 scale) durometer.

Printz™ formulation pads - High Quality

Our Printz™ rubber formulation is quickly becoming our most popular silicone pad material, as it is priced extremely well and it performs at a high level, even when compared to pad materials that cost much more. This Printz™ silicone is easy to recognize with its distinctive “purple rain” color and it is quick to break in, provides full definition ink pickup and transfers all types of pad printing inks very well. Our Printz™ silicone will have you singing high praises as it is a rock-star in our star-studded line-up. Contact your local sales rep to request a free pad sample of our newest Printz™ material. The Printz™ silicone rubber material is available in 65 to 40 Shore A (00 scale) durometer.

Pad Ordering Instructions

Pad Ordering Instructions
 
1) PAD SHAPE PREFIX CODE
An alpha character prefix defines shape of the pad
R = Round
S = Square
V = Vee or Stick
L = Loaf
C = Custom
2) PAD NUMBER
We assign pad numbers consecutively as we create new molds. The pad number has no bearing on the size of the pads.
3) DUROMETER COLOR CODE:
All bases are color coded to designate durometer
DuraProTM DuraLiteTM Stat-XTM PrintzTM Color Code Durometer (00)
* * * * R=Red 60-65
* * * * Y=Yellow 50-55
* * * * G=Green 40-45
* * * * B=Blue 30-35
* * * * O=Orange 20-25
4) BASE TYPE CODE
All bases are available in five configurations.
A = .250” Aluminum
B = .500” Aluminum
C = .375” Aluminum
W = Wood
X = Thin Wood
5) INSERT CODE:
Threaded Insert or Tapped in Aluminum
N = No Insert
M = Metric (6 x .1mm course)
S = Standard (3/8" - 16)
T = Tapped in Aluminum (10-32)
Q = Quarter / Twenty (1/4" 20)
6) SPECIAL CODES:
G = High Gloss surface
P = Our PrintzTM formulation (purple silicone)
X = Our Stat-XTM formulation (green silicone)
Note: There is no special etension for our Dura Pro series (red silicone)

 

Need help selecting a pad?

If you do not know which pad(s) will fit your needs we will assist you in selecting the proper pad shape for your application. Please call our customer service department, but before you call we need the following information:

  1. Machine type and model number
  2. Inkwell and/ or cliché dimensions
  3. Size and description of the part to be printed
  4. Substrate material type
  5. Part drawing (if possible) or please send us sample parts
  6. Description of texture (if any) on the parts
  7. Copy of artwork

 

 

How do I know what pad to use for this part?

One of the most frequently asked questions in the early stages of learning the do's and don'ts of the pad printing process is figuring out what pad to use for the part you are printing on.